Open almost any preset you like and look at its Tone Curve. The faded blacks of a film look, the punchy contrast of a moody edit, the soft pastel highlights of a bright and airy style: most of it lives in a few points on one graph. The Tone Curve is the most powerful tonal tool in Lightroom, and it is also the one people skip because it looks technical.
This Lightroom tone curve guide walks through the two curve modes, the RGB channels, and the three shapes you will use most: the S-curve, the matte fade and the color tint. By the end you should be able to read any preset’s curve and build your own.
Quick answer: The Tone Curve remaps brightness. The horizontal axis is the original tone (dark on the left, bright on the right) and the vertical axis is the new tone. Push a point up to brighten, down to darken. An S shape adds contrast, raising the bottom-left point fades blacks, and the Red, Green and Blue channels add color tints.
On this page
Where to find the Tone Curve
- Lightroom Classic: the Tone Curve panel in the Develop module, right below Basic.
- Lightroom desktop: open the Light panel and click Curve.
- Lightroom mobile: tap Edit, then Light, then Curve. The curve opens over the photo and you drag points with a finger.
In all three apps a row of small icons sits above the graph. In current versions these are Parametric, Point (the white or RGB curve), Red, Green and Blue. Older versions of Classic hid the point curve behind a small button in the panel’s corner, so if your panel looks different, update the app or look for that button.
How to read the graph
The diagonal line running from bottom-left to top-right means “no change”. Every tone in the photo maps to itself. The bottom-left corner is pure black, the top-right is pure white, and the middle of the line is a mid gray.
When you drag a point on the line upward, that tone becomes brighter. Drag it down and it becomes darker. Lightroom bends the rest of the line smoothly around your point, so nearby tones move too. That smooth bending is why curves look more natural than pushing a single slider hard.
The histogram is drawn faintly behind the curve. Use it as a map: if most of the histogram sits on the left, your photo is mostly shadows, and changes in that part of the curve will have the biggest effect.
Parametric curve vs point curve
The parametric curve
The parametric curve gives you four sliders instead of free points: Highlights, Lights, Darks and Shadows, each from -100 to +100. Each slider bends one region of the curve. Under the graph there are three small split-point handles that move the boundaries between those regions, so you can decide where “darks” end and “lights” begin.
The parametric curve is hard to break. You cannot create wild zigzags, which makes it a good place for beginners and for quick, gentle contrast. In Classic you can also pick the Targeted Adjustment tool (the small target icon), then click and drag up or down directly on the photo to move whichever region sits under the cursor.
The point curve
The point curve lets you click anywhere on the line to add a point, then drag it. You can add many points, but most good curves use three to five. To delete a point, drag it off the graph or right-click it and choose the delete option. In Classic, a Point Curve menu also offers quick shapes such as Linear, Medium Contrast and Strong Contrast.
The two curves stack. Lightroom applies the parametric adjustments together with the point curve, so a preset can use both. When you open someone else’s preset and the tones look odd, check both views.
Quick tip: Double-click a parametric slider’s name to reset it. To start a point curve over in Classic, right-click the graph and look for the Flatten Curve option. The desktop and mobile apps have their own reset controls, and the labels differ slightly by version, but every one lets you return to a straight line.
Shape 1: the S-curve for contrast
The S-curve is the classic contrast move. Pull the shadow side down a little and push the highlight side up a little, and the line takes a gentle S shape. Darks get darker, brights get brighter, and the midtones stay roughly where they were.
| Setting | Value | Why |
|---|---|---|
| Point 1 | Input 0 / Output 0 | Keeps true black |
| Point 2 | Input 64 / Output 54 | Darkens the shadows slightly |
| Point 3 | Input 128 / Output 128 | Anchors the midtones so skin does not shift |
| Point 4 | Input 192 / Output 202 | Brightens the lighter tones |
| Point 5 | Input 255 / Output 255 | Keeps true white |
Moves of 8 to 12 points are plenty on most photos. A curve adds contrast in a different way from the Contrast slider: the slider works around a fixed middle, while the curve lets you choose exactly where the contrast happens. Placing the S over the midtones gives punch to faces and landscapes without crushing the deepest shadows.
A steeper section of the curve means more contrast in that tonal range, and a flatter section means less. That single idea explains almost every curve you will ever see.
Shape 2: the matte fade
The faded, matte look comes from lifting the black point. Drag the bottom-left point straight up so that pure black in the original becomes a dark gray. Nothing in the photo can now be darker than that gray, which softens the image and gives it a film-like feel.
- Lift the black point. Drag the bottom-left point up to an output of about 20 to 35. Higher numbers give a stronger fade.
- Add a shadow anchor. Click around input 50 to 70 and pull it slightly down so the shadows still have some depth. Without this the whole image goes flat and milky.
- Optionally pull the white point down. Dragging the top-right point down to around 240 softens the highlights too, for a gentler vintage look.
- Check the Blacks slider. If the photo now looks washed out, add a little contrast back with the Blacks slider in the Light or Basic panel rather than undoing the fade.
This is the base of our vintage film preset settings, and a lighter version shows up in most moody and airy presets as well.
Shape 3: color tints with the RGB channels
Switch from the white point curve to the Red, Green or Blue channel and the same moves now change color instead of brightness. Each channel works as a pair of opposites:
- Red: up adds red, down adds cyan.
- Green: up adds green, down adds magenta.
- Blue: up adds blue, down adds yellow.
Because each point targets a tonal range, you can tint shadows and highlights differently. A popular film-style move is to lift the bottom-left point of the Blue channel a little (bluish shadows) and pull the top-right point down a little (yellow, warm highlights). Keep these moves small. Shifts of 5 to 15 points are usually enough, and larger ones tend to make skin look sick.
Channel curves overlap with the Color Grading panel, which tints shadows, midtones and highlights with color wheels. Color Grading is easier to control and to read later, so many editors use it for the main tint and save channel curves for small corrections. Our color grading guide covers the wheels in detail.
Region sliders in practice
If you prefer sliders, here is how the four parametric regions map to everyday problems:
| Slider | What it changes | Typical use |
|---|---|---|
| Highlights | The brightest tones | Lower it to soften bright skies or windows |
| Lights | Upper midtones | Raise it to brighten skin and add glow |
| Darks | Lower midtones | Lower it for depth without crushing black |
| Shadows | The darkest tones | Raise it slightly for a gentle fade |
These are not the same as the Highlights and Shadows sliders in the Basic or Light panel. Those sliders try to recover detail in a smart, local way. The curve sliders simply remap tones across the whole image, which is more predictable and better suited to building a look.
Common tone curve mistakes
- Too many points. Every extra point is a chance for a bump in the line, and bumps create banding or odd posterized patches. Three to five points cover nearly every look.
- Fading without anchoring. Lifting black without a shadow anchor makes the whole image gray. Always add a point to hold some depth.
- Doing exposure with the curve. Fix overall brightness with Exposure first, then shape it with the curve. Curves are for style, not rescue.
- Strong channel curves on portraits. Skin sits in the midtones, so a big Red or Green move there is very visible. Tint the ends of the curve, not the middle.
Your next edit
Pick a photo with normal exposure and try each shape in turn: a gentle S, then a matte fade, then a small Blue channel split. Save the version you like as your own preset with only the Tone Curve box checked, so it layers on top of any edit. Our guide to creating your own Lightroom preset shows exactly how to save just the curve.
FAQ
What is the difference between the parametric and point curve in Lightroom?
The parametric curve uses four sliders (Highlights, Lights, Darks, Shadows) that bend broad regions of the curve, so it is safe and quick. The point curve lets you place your own points anywhere for precise control. Lightroom applies both together.
How do I get a matte or faded look with the Tone Curve?
Drag the bottom-left point of the point curve straight up to an output of roughly 20 to 35, then add a shadow point slightly lower to keep depth. For a softer feel, pull the top-right point down a little too.
Is the Tone Curve available in Lightroom mobile?
Yes. Tap Edit, then Light, then Curve. Current versions include the point curve, the Red, Green and Blue channels, and a parametric mode, though the exact icons can differ slightly by version.
Should I use the Tone Curve or the Contrast slider?
Use Contrast for a quick overall change and the Tone Curve when you want to control where the contrast happens or create a fade. Many presets use a small Contrast move plus a gentle curve.